SimSolid Drives Down Analysis Time at Don-Bur
Truck trailer manufacturer, Don-Bur, discuss the challenges its engineering team was having with simulation in SolidWorks, and how a move to SimSolid has cut its simulation time from hours to a just few minutes.
Video Testimonials
What Can We Learn from Nature for Modern Architecture Structures?
Eric Rusinol, an Architect from The Sagrada Família Foundation, gives us some insight into the project to finish Antoni Gaudí's iconic Cathedral in Barcelona, touching on the teams use of optimization and concept generations technologies from Alta...
Video Testimonials
Additive Manufacturing of a Satellite Antenna Bracket
Analysis and design of a 3D printed antenna support for the Sentinel-1b satellite by RUAG Space with Altair Products.
Video Testimonials
Ping Golf: Using CAE and HPC for Virtual Prototyping
In this short interview Eric Morales, Sr Research Engineer at PING Golf, explains how combining CAE simulation with the latest HPC technology has greatly reduced product development time.
Video Testimonials
Specialized Wins at Le Tour de France with Altair HyperWorks
Learn how Specialized analyzed and improved the aerodynamic performance as well as optimized the weight and structural efficiency of the new S-Works Venge frame.
Video Testimonials
Ford's Thoughts on Relationship with Altair for Lightweighting
John Viera, Global Director, Sustainability and Vehicle Environmental Matters at Ford Motor Company, gives his thoughts on the relationship with Altair and its importance as the company continues to drive down vehicle weight.
Video Testimonials
Ford Research Center - Interview with Dr. Niels Pasligh
Niels Pasligh from Ford Research Center Aachen, Germany, is talking about his team's challenges and how they work with Altair products to tackle these.
Video Testimonials
Speed and Safety- Interview with Luca Pignacca of Dallara Automobili
Manufacturing and supply of Racing Cars, Dallara Automobili uses HyperWorks to help design all of their racing cars.
Video Testimonials
TK Mattingly Discusses Water Landing Simulation of the NASA Orion Crew Module
T.K. Mattingly, former Apollo Astronaut and Director of Space Enterprise for Systems Planing and Analysis, reveals how he worked with Altair ProductDesign to simulate the water landing of the NASA Orion Crew Module.
Video Testimonials
PollEx PCB Verification for Design for Electrical Engineering Plus
In this tutorial we will look at using PollEx PCB verification for electrical engineering plus.
Getting Started, Training Materials, Tutorials
PollEx CAM for Gerber Review
In this tutorial we will look at using PollEx CAM to review Gerber data.
Getting Started, Training Materials, Tutorials
PollEx Gerber to PCB for Converting Gerber to Intelligent PCB Design Format
In this tutorial we will look at using PollEx to convert gerber files to intelligent PCB design format.
Getting Started, Training Materials, Tutorials
PollEx Underfill for Generating BGA Underfill Location
In this tutorial we will look at using PollEx to find the BGA Underfill location using the Underfill option.
Getting Started, Training Materials, Tutorials
PollEx Metal Mask Manager for Generating and Managing Metal Mask
In this tutorial we will look at using PollEx to generate and manage the metal mask using the Metal Mask Manager.
Getting Started, Training Materials, Tutorials
PollEx Router Machine JIG Generator for Extracting Router JIG Data
In this tutorial we will look at using PollEx to extract router JIG data.
Getting Started, Training Materials, Tutorials
PollEx Mounting Data Extractor for Extracting SMT Library Format
In this tutorial we will look at using PollEx to extract the SMT library format using the Mounting Data Extractor.
Getting Started, Training Materials, Tutorials
PollEx Logic Verification for Logic Design for Electrical Engineering Logic DFE
In this tutorial we will look at using PollEx to to verify the DFE logic design for electrical engineering.
Getting Started, Training Materials, Tutorials
PollEx Mounting Emulator for Verifying the Component Location and Angle
In this tutorial we will look at using PollEx to verify the component location and angle using the Mounting Emulator.
Getting Started, Training Materials, Tutorials
PollEx BOM for Reviewing a Bill of Materials
In this tutorial we will look at using PollEx BOM to review the bill of materials.
Getting Started, Training Materials, Tutorials
PollEx Block JIG Generator for Extracting Block JIG Files from PCB Layout
In this tutorial we will look at using PollEx Block JIG Generator to extract block JIG files from the PCB layout.
Getting Started, Training Materials, Tutorials
PollEx GDSII Compare for Comparing and Extracting GDSII Format
In this tutorial we will look at using PollEx to compare and extract GDSII format using the GDSII Compare tool.
Getting Started, Training Materials, Tutorials
PollEx Test Point Location Generator for Extracting Test Point Location
In this tutorial we will look at using PollEx to extract the test point location using the test point location generator.
Getting Started, Training Materials, Tutorials
PollEx PCB Worksheet Planner for PCB Design Working Planner
In this tutorial we will look at using PollEx to create the PCB design working planner.
Getting Started, Training Materials, Tutorials
PollEx Solder Quantity Calculator for Estimating Solder Amount
In this tutorial we will look at using PollEx to estimate the quantity of solder on a model.
Getting Started, Training Materials, Tutorials
PollEx Logic for Schematic Design Review
In this tutorial we will look at using PollEx for schematic design review.
Getting Started, Training Materials, Tutorials
PollEx PCB Golden Sample for PCB Design Golden Sample Generator
In this tutorial we will look at using PollEx to generate a PCB golden sample.
Getting Started, Training Materials, Tutorials
Altair Mold Overview
Inspire Mold is a complete molding simulation in 5 easy steps through a highly intuitive user experience, catering to beginners and experts alike allowing designers and product engineers to improve part performance while reducing defects and iterations between design and manufacturing.
Visit a h
Video Testimonials
Introducing Altair Inspire Mold
Altair Inspire Mold provides a modern integrated approach to streamline design for manufacturing (DfM) of injection molded components.
Video Testimonials
The Future of Digital End-to-End Engineering Process and Its Interoperability
Kentaro Fukuta from Elysium Co. Ltd., an APA partner, discusses the future of digital end-to-end engineering process and its interoperability.
Video Testimonials
The Future of Automotive Multi-body Dynamic Simulations
Danny Nowlan from ChassisSim, an APA partner, discusses the future of automotive multi-body dynamic simulations.
Video Testimonials
The Future of Fatigue and Durability Analysis
Jon Aldred from HBM Prensica, an APA partner, discusses the future of fatigue and durability analysis.
Video Testimonials
The Future of the Design Optimization for Additive Manufacturing
Lucas Hellemans from Materialise, an APA partner, discusses the future of design optimization for additive manufacturing.
Video Testimonials
The Future of Fatigue Life Prediction
Klaus Hofwimmer from Magna Powertrain, an APA partner, discusses the future of fatigue life prediction.
Video Testimonials
The Future of a More Responsible Foundry Industry
H?kan Fransson from NovaCast Systems AB, an APA partner, discusses the future of a more responsible foundry industry.
Video Testimonials
The Future of NVH Simulations
Fran?ois-Xavier Bécot from MATELYS Research Lab, an APA partner, discusses the future of NVH simulations.
Video Testimonials
The Future of Plastics Simulation
Wolfgang Korte from PART Engineering, an APA partner, discusses the future of plastics simulation.
Video Testimonials
The Future of Powertrain Electrification
Oliver Knaus from AVL, an APA partner, discusses the future of powertrain electrification.
Video Testimonials
The Future of Thermal Management
Craig Makens from ThermoAnalytics Inc., an APA partner, discusses the future of thermal management.
Video Testimonials
The Future of Materials Information in Industry and Emerging Technologies
Neil Bauman from Key to Metals AG, an APA partner, discusses the future of materials information in industry and emerging technologies.
Video Testimonials
PollEx PCB Signal Integrity for Board Level Analysis
In this tutorial we will look at using PollEx to run PCB Signal Integrity for Board Level Analysis.
Getting Started, Training Materials, Tutorials